Posted by Michael Posner on April 10, 2015
You read the title correctly, this blog discusses prototyping over 700 Million ASIC gates using the Xilinx Virtex-7 2000T FPGA’s. To get to this capacity you need to utilize sixty four (64) FPGA’s. The picture above was taken in the Synopsys HAPS lab and shows part of our Super Chain testing. As noted previously, HAPS documented seamless deployable capacity is 288 Million ASIC gates, which is six HAPS-70 (four) FPGA systems chained together, a total of twenty four (24) FPGA’s. However we have customers where this is not enough. The HAPS solution is modular and scalable with base building blocks of x1, x2 and x4 FPGA systems and supported with a HAPS-Aware design tool flow.
The HAPS capabilities and software infrastructure enables the solution to scale with ease but Synopsys does not claim support for capabilities until they have been tested and validated. Once the HAPS systems are configured in the Super Chain they act as one unified massive prototyping system. Thanks to our synchronized clocking capabilities the prototyped design still utilizes the HAPS High Speed Time-Domain Pin Multiplexing, HSTDM, which enables the highest system performance. The above picture super chain models sixty four FPGA’s operating synchronously with HSTDM between all FPGA’s ensuring the highest system performance. That’s over 700 Million ASIC gates (12 million ASIC gates per FPGA)…
While HAPS can scale to these huge systems that does not mean that users of just x1, x2, x4 or x8 FPGA’s do not benefit from this testing. Testing of such large systems ensures that the communication, clock synchronization, HSTDM and other capabilities are bullet proof which benefits the smaller system usage ensuring maximum reliability and uptime when used in server farms or on the user’s desk.
Off subject, while visiting Mountain View CA I noticed that one of our creative R&D engineers had come in over the weekend and decorated their Cube space for Easter
Absolutely amazing don’t you think! Anyway I introduced myself to the R&D engineer and congratulated them. Apparently they do this once in a while and shared a couple of pictures of their previous cube creations.
Crazy cool right!!! I also think that this R&D engineer might have just a little too much time on their hands. Or maybe they are just like me and maximizes every second or every day. I personally think there is a business here, cubicle decoration in a box…. Would you buy a box of decorations to jazz up your cube?