Posted by Michael Posner on April 28th, 2014
Synopsys just announced ProtoCompiler which is automation and debug software for HAPS FPGA-Based Prototyping Systems. ProtoCompiler is the result of years of R&D effort to generate a tool that addresses prototypers challenges today and built on top of an architecture which can support the needs of prototypers long into the future. ProtoCompiler focuses on the needs of prototypers specifically addressing the need for accelerated bring up as well as providing capabilities which result in higher system performance as compared to existing solutions. In this blog I’ll discuss some of the technical details behind the main tool highlights. Below are the detailed highlihts.
Integrated HAPS hardware and ProtoCompiler software accelerate time to prototype bring-up and improves prototype performance
Automated partitioning across multiple FPGAs decreases runtime from hours to minutes for up to 250 million ASIC gate designs
Enables efficient implementation of proprietary pin multiplexing for 2x faster prototype performance
Captures seconds of trace data with gigabytes of storage capacity for superior debug visibility
(Read to the end of the blog if you also want an update on Mick’s Projects)
Highlight: Integrated HAPS hardware and ProtoCompiler software accelerate time to first prototype bring-up and improves prototype performance
As noted above the goal of ProtoCompiler is to accelerate the bring up of a prototype as well as providing a path to the fastest possible operating performance. ProtoCompiler is unique as it combines hardware/software expertise with intimate knowledge to deliver superior results. Think of it as delivering a HAPS hardware expert packaged up into a format that anyone using the tool can access. ProtoCompiler has deep technical knowledge of the HAPS hardware including configuration, clocking structures, interconnect architecture, pin multiplexing expertise and more. ProtoCompiler is not only a hardware expert, it’s also a software expert. ProtoCompiler is built on top of a state of the art Synopsys proprietary prototyping database that means RTL is effectively processed and incremental and multi-processing techniques can be deployed with ease.
All this results in blazingly fast processing speeds. As an example ProtoCompiler’s area estimation, essential for automated partitioning, can processed 36 Million ASIC gates in less than 4 hours as compared to 22 hours in existing solutions. Now that’s fast!. Thanks to the new data model and incremental modes all subsequent compiles are even quicker.
Highlight: Automated partitioning across multiple FPGAs decreases runtime from hours to minutes for up to 250 million ASIC gate designs
So there are actually two announcements packaged up in this highlight. Starting in reverse ProtoCompiler supports 250 Million ASIC gate and larger designs. Humm, this sounds a little suspect as when HAPS-70 was launched it only supported 144 Million ASIC gates, what does ProtoCompiler know that we don’t? Luckily I know, HAPS-70 can now be scaled to support 288 Million ASIC gates, 2x the capacity. HAPS-70 now supports chaining of any six systems so if you chain six HAPS-70 S48’s you get a total of 288 Million ASIC gates supported which is 24 Xilinx Virtex-7 2000T FPGA’s. All working in one synchronous system.
Any 3 HAPS systems can be chained via our standard control and data exchange cabling, when you go above 3 systems you utilize a synchronization module that manages the system synchronization. Managing clock skew, reset distribution and configuration is all handled automatically. ProtoCompiler understands the hardware capabilities thus making deployment of such a system a snap. No longer do your engineers have to worry about how to distribute clocking, we have done the hard work so you don’t have to. Other vendors “claim” scalability and modularity but if all they are delivering is boards then it’s nothing more than a wild claim. To deploy a scalable and modular system you need a complete solution of software and hardware. You can now prototype SoC designs you thought never possible
The first part of the highlight introduces the new partition technology deployed in ProtoCompiler. ASIC’s are bigger than a single FPGA so you need to quickly partition the design across multiple FPGA’s. Historically this has been a challenge but with ProtoCompiler that challenge has been overcome. The partition engine in ProtoCompiler requires minimal setup before you can apply it to your design. There are four simple steps to setup the partition engine #1 Create target system, basically which system(s) you are compiling to. #2 Establish basic constraints which are things like blocks of IO. #3 Define the design clocks. #4 Propose an interconnect structure. Actually #4 can either be defined telling the partition engine to use a set interconnect architecture or leave it open and let the tool do it. There are advantages of both. By letting the tool pick the needed architecture the resulting system should be higher performance as ProtoCompiler will maximize interconnect to reduce pin multiplexing ratio. In a previously deployed system you may have already set the interconnect and then want the tool to use the available resources so you don’t make any changes to the hardware in the field. ProtoCompiler has the flexibility to do both meeting the needs of new prototype creation and image re-spin after a new RTL code drop.
ProtoCompiler partition engine is FAST, using the same example as above, 36 Million ASIC gates, ProtoCompiler was able to come to an automated solution is 4 minutes!!! WOW. ProtoCompiler provides a huge amount of information as to what it automatically did so that the engineer can quickly review the results and maybe provide ProtoCompiler more guidance to optimize the partition. For example after the first run you might want to lock down select parts of the design and then incrementally run the engine to push it to find a better solution for the rest of the design. As it runs so fast you can do multiple of these optimization iterations in a matter of hours. I’ve played with the tool as I was interested in this particular capability and have to say it’s amazing. I’ve tried the open method and let the tool find a solution for itself, in this mode ProtoCompiler pretty much finds a solution every time. I also played with challenging the tool for example locking the tool to use only 100 IO’s (two HT3 connectors) between FPGA’s. ProtoCompiler quickly finishes and told me that I was crazy and that the design could never be partitioned with my selected interconnect architecture.
Highlight: Enables efficient implementation of proprietary pin multiplexing for 2x faster prototype performance
OK, this is simple, this basically says that ProtoCompiler can automatically deploy the HAPS High Speed Time-Domain Multiplexing (HSTDM). HSTDM is developed and optimized on HAPS and ProtoCompiler packages up this expertize and automated the deployment. The partition engine will automatically select HSTDM and instance it into the prototype design. HSTDM delivers high performance pin multiplexing between multiple FPGA’s. The signals are packaged up, sent across a high performance link and unpacked at the other side. This all happens within one system clock and is completely transparent to the user. No manual intervention, no additional latency, and it’s stable and reliable as HSTDM is tested as part f the HAPS production testing and every system has to pass the minimum HSTDM performance tests. This ensures that when you deploy am image with HSTDM that it runs on every system the image is loaded on. No need to tailor the pin multiplexing implementation for each board like you have to do with other vendors.
Highlight: Captures seconds of trace data with gigabytes of storage capacity for superior debug visibility
ProtoCompiler expands the debug capabilities and grows the HAPS Deep Trace Debug capability which utilizes off-FPGA memory to store debug data. ProtoCompiler provides seamless multi-FPGA debug capabilities on top of a set of other debug capabilities tailored to delivering visibility at the right level of the debug cycle.
In debug one size does not fit all, you need to deploy the right level of debug visibility capability dependent on what you are trying to debug and the specific point you are in the project cycle. Sometimes you want very wide debug visibility with fast incremental turn-around. Later in the design cycle you typically want very, very deep debug windows. ProtoCompiler delivers both, fully automated through the flow, seamless and transparent to the users. And when I say deep, I mean deep, the example below is very typical of the debug window where you can easily capture seconds of debug data.
As usual my blogs got really long. I wrote it in the car while driving from Portland to Eugene. Amazing that I could type all of this and drive at the same time (LOL, only joking I was in the passenger seat)
Anyway, ProtoCompiler is the bees knees and I personally think it revolutionizes FPGA-based prototyping using HAPS. What do you think of ProtoCompiler?
If you have managed to get this far into my blog then congratulations. I’ve been taking it easy this week while I recover from the pneumonia that I came down with. In the evenings I finished off the two mini RC tracked vehicles I had been working on. The basis of both are simple kits which I then modified and added RC receivers and motor controllers to. While I am a grown adult I must admit they are fun to play with. The first is a basic platform RC tracked vehicle which I attached a Lego sheet to. Little did I know that this would be so popular with my son. He has been building towers and all types of structures on top of it.
Why drive your car to a car park when the car park can come to you. No joke that’s what my son said.
Mobile tire store
Bulldozer and sweeper
At the same time I also built a kit that has a shovel that moves on the front. Again I modified it to be radio controlled, including the shovel. This vehicle is a HUGE hit with my son and he has been busy building towers, knocking them down, then tidying them up with the shovel.
There are a couple of video’s of these little things in action on my You Tube page: https://www.youtube.com/user/MrMickPosner (and a video of my chicken food winch system)